Print

Material Specifications

1) Let's Play Modular Playground System
A) Post
These components shall be made of aluminium and coated with PEF ultra violet polyester powder coating. All post outer diameter shall be of minimum 89mm.

ms-1

B) Polyetheylene Post Cap
All exposed posts top shall be fitted with injetion molded high-density polyethylene cap, stablized against ultra violet (UV) degradation.

ms-2

C) Rotational Moulded Polyethylene Deck
Rotational Moulded Polyethylene deck is farbicated from rotationally moulded linear medium density polyethylene consisting of ultra violet (UV) stabilizer and colour impregnation, with anti static guard with an average wall thickness of 5-6mm. The size of the deck shall be 900mm x 900mm x 70mm.

ms-3

D) Rotational Moulded Polyethylene Components
Components such as slides, tube slides, exit panel and etc is made from rotationally moulded linear density polyethylene consisting of ultra violet (UV) stabilizer and colour impregnation. The average thickness of these components shall be of minimum 5mm.

ms-4

E) HDPE Plastic Panel
Play panel shall be fabricated using high density polyethylene (HDPE) consisting ultra violet (UV) stabilizer. The thickness of each play panels varies from 10mm to 15mm depending on application.

ms-5

F) Roof
Roof shall be fabricated from High Density Polyethylene (HDPE) panels of minimum 5mm to 12mm.

ms-6

G) Steel Components
Steel components are farbricated using standard welding technique of mild steel pipe size ranging from Outer Diameter 27mm to 48mm. These components are galvanized and powder coated.

ms-7

2) Independent Play Items
A) Swing
Swing shall be fabricated from steel hollow sections and posts, galvanized and PEF ultra violet powder coated. The swing joint have ball bearings to ensure smooth running. Swing seats are made of steel plate covered with slazh proof EPDM and swing chain shall be of stainless steel.

ms-8

B) Spring Riders
The body of the spring rider shall be fabricated from high density polyetheylene (HDPE) with thickness raning from 10mm to 15mm. Spring coil is made of 19.6mm diameter special alloy steel hot wound to a 140mm Outer Diameter. The spring rider base plate is made of 8mm thick galvanized sheet.

ms-9

C) Spring Seesaw
Seesaw beam shall be made from steel hollow sections of 100mm x 100mm, hot-dipped galvanized and polyester powder coated. Seesaw beam length shall be of minimum length of 2000mm to 3000mm depending on model. Spring coil is developed in 19.6mm thick and Outer Diameter at 140mm with its height at 350mm; galvanized and polyester powder coated.

ms-10

3) Bolts and Nuts
All hardware such as bolts, nuts, wahers, screws, and etc are made fully from stainless steel. Exposed hardware will be covered with ultra violet stablized plastic safety cap.

ms-11